ACDP Programmer Basic Module
Supports 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming(ICP). This module is a necessary basic configuration for other modules.
CAS Module module 1
Supports CAS1 – CAS3 IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data. Supports CAS4/CAS4 IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
FEM/BDC Module module 2
Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
ISN Module module 3
Read/write N20/N55/N13 ISN code via OBD. Read/write MSV80/MSD85 ISN code without opening DME shell. Read/write other DME ISN code by opening DME shell.
ACDP Programmer 1 PC
OBP ICP Adapter 1 PC
Puncture Socket 1 PC
BAV-KEY adapter 1 PC
P8P Cable 1 PC
8P Cable 1 PC
20P Cable 1 PC
12V Switch Power Supply 1 PC
Test Points cleaning probes 4 PCS
Double-head line 3 PCS
BDM01 adapter 1 PC
BDM-ICP cable 1 PC
BMW-CAS3 Interface board 1 PC
BMW-CAS4 Interface board 1 PC
CAS3 Copper pillar Package M2.5*12 6mm 6 PC S
CAS4 Copper pillar Package M2.5*12 6mm
FEM/BDC Bench integrated interface board 1PC
BMW-N13 Interface Board 1 PC
N20 shell drilling hole caliper 1 PC
P CAN Cable 1 PC
N13 Interface Board Copper pillar package (Single head six angle stud M3.5*27 8mm) 4 PC S
BM W N13 interface board.
PC Software installation > here
Installation guide > here
Android installation > here
For Apple products (IOS) please download direct from the app store.
ACDP Basic Module List ACDP CAS Module1 List ACDP FEM BDC Module2 List ACDP ISN Module3 List