Cutting-Edge DPF Cleaning Machines by MET

Established DPF cleaning machines, available exclusively from Mobile Eco Tuning

Who Buys a METClean DPF Cleaning Machine, and Why

Diesel Particulate Filter failure is one of the most common, and most profitable, jobs in modern automotive workshops. Yet most UK garages still send every blocked DPF out the door to a third party, waiting days for a job that could be earning them money in-house. METClean exists to change that.

Whether you’re an established garage tired of outsourcing, a mobile remapper looking to build a genuine one-stop-shop, or an entrepreneur who’s spotted a booming niche and wants in, a METClean DPF cabinet cleaner turns DPF refurbishment into a same-day, in-house revenue stream, backed by real UK support from people who refurbish DPFs every single day. If you’re new to the subject, our guide to DPF refurbishment covers what a DPF clean involves from the customer’s side, and the full METClean range covers every on-vehicle and off-vehicle product we manufacture.

What a METClean Machine Actually Does

A METClean machine is an off-vehicle DPF refurbishment system. The filter is removed from the car, sealed into the cabinet, and cleaned using microcavitation cleaning technology: a combination of high and low-pressure water flow, timing, and heat that physically implodes and flushes trapped particles out of the ceramic substrate.

This matters because most on-car “DPF cleans” address combustible soot. They cannot remove the non-combustible ash that accumulates permanently within the filter substrate and progressively restricts airflow. Off-vehicle professional DPF cleaning is the only method that reaches that deep-seated ash. A proper cabinet cleaning cycle can remove soot and ash and, where the filter is structurally sound and suitable for cleaning, restore measured airflow and back-pressure close to its original performance, typically within a 60 to 70 minute cycle. For a closer look at exactly how a cabinet DPF cleaner works and how the models in the range compare, see our full buyer’s guide.

The result is a legal, sustainable alternative to DPF removal (which isn’t road-legal) and to premature replacement (which can cost the customer well over £1,000). Refurbish DPF rather than replace it, and everyone wins: the customer pays less, the filter is kept out of landfill, and the workshop pockets a high-margin job that used to walk out the door to a third party.

Refurbish vs Replace: Why It’s the Easier Sell

A new OEM DPF commonly costs £1,000 to £2,500 or more, while a professional off-vehicle clean typically retails for £200 to £400. The water, power and cleaning consumables used during a METClean cycle cost only a few pounds, excluding labour, filter removal and refitting, premises and other business overheads. Based on current machine prices and typical retail charges, the gross revenue from approximately 20 to 30 cleans can equal the purchase price of selected METClean models. Actual payback and profit will depend on the machine selected, service pricing, workload and operating costs. Compatible METClean machines can also clean SCR systems, DOCs, intercoolers and radiators, creating additional revenue opportunities beyond DPF refurbishment.

Who METClean Machines Are Built For

The garage that’s outsourcing DPF work. If you’re an established workshop currently sending filters to a third-party DPF specialist, and waiting days, paying a premium, and losing control of turnaround times, a METClean machine brings that job back in-house. You keep the customer relationship, the margin, and the same-day turnaround, instead of handing all three to someone else.

The garage looking to add revenue. For workshops that don’t currently touch DPFs at all, METClean is a straightforward way to add a proven, high-demand service to the books without retraining staff into a new trade. It slots alongside existing servicing and diagnostic work.

The mobile remapper or tuner. If you’re already visiting customers to remap or diagnose vehicles, a METClean machine, including compact, van-friendly models, lets you offer true one-stop-shop mobile DPF refurbishment, turning a return visit or referral into a job you complete yourself. Our guide on starting mobile DPF cleaning with the METClean V walks through exactly how tuners and remappers add this to their round.

The entrepreneur entering automotive for the first time. A METClean cleaning business can be operated by someone without a previous automotive career, provided the machine operator completes the supplied training and follows the operating, safety and filter-assessment procedures. DPF diagnosis, removal and refitting should be handled by a competent automotive technician. A cleaning-only business can instead accept removed filters from local garages, allowing the operator to develop a specialist refurbishment service without providing mechanical work. If this is your intended model, our guide to starting a DPF cleaning business is a useful place to begin.

Backed by Real UK Support, Not a Box-Shipper

Every METClean machine is designed, and supported in the UK, not dropped off by an overseas reseller who disappears after the sale. Buying from Mobile Eco Tuning, a UK supplier, means:

• On-site installation and hands-on training. New owners get proper DPF specialist training, not just a manual: real instruction on running cycles, reading back-pressure results, and getting the most from the machine from day one.
• UK support that answers the phone. A 12-month warranty with on-site engineer support, plus an ongoing UK-based technical team, access to our network, the same people who use these machines daily in Mobile Eco Tuning‘s own workshop.
• Real-world expertise. Mobile Eco Tuning isn’t a distributor reading a spec sheet. The team refurbishes every type of DPF, day in, day out, at its own South West HQ, and feeds that field experience straight back into product support and training.
• A genuine UK network. Mobile Eco Tuning supports a network of more than 800 remapping agents across the UK and Europe. METClean machine owners also receive product-specific training and technical support from the MET team. Find out more about becoming a MET agent.

Ready to Stop Outsourcing?

Whatever stage you’re at, bringing DPF work in-house, adding it as a new mobile or workshop service, or building a dedicated local DPF refurbishment business from scratch, a METClean machine, UK training, and ongoing UK support are all included from day one. Explore the METClean range or get in touch to talk through which model fits your business.